Форумы на Хакер

Добро пожаловать! Это — архивная версия форумов на «Хакер.Ru». Она работает в режиме read-only.

Сборка DVD диска

Пользователи, просматривающие топик: none

Зашли как: Guest

Все форумы >> [*nix/Linux] >> Сборка DVD диска

Имя

Сообщение

<< Старые топики Новые топики >>

Сборка DVD диска - 2008-08-17 00:53:31.936666

Fad.Mypl

Сообщений: 49
Оценки: 0
Присоединился: 2008-08-13 13:17:23.186666

Скачал исошнеги FreeBSD 7.0 с оффа, комплект состоит из трёх CD дисков. Помогите псобрать из них один DVD. Заранее благодарен.

Post #: 1

RE: Сборка DVD диска - 2008-08-17 14:11:46.783333

tuxmashine

Сообщений: 303
Оценки: 0
Присоединился: 2008-06-03 12:37:50.110000

загляни сюда http://it-nt.ru/blog/?p=11 и сюда http://thepiratebay.org/torrent/4051965 . и давайте учиться пользоваться гуглом, прежде чем задавать вопросы сюда

Post #: 2

RE: Сборка DVD диска - 2008-08-17 15:10:36.726666

mobydick

Сообщений: 354
Оценки: 0
Присоединился: 2008-08-08 01:16:49.146666

I can give you an example from my own FreeBSD practice. You just need internet connection and the 1st CDROM. Install only the base system and source distribution.
Then ~#:portsnap fetch
~#:portsnap extract
~#:cd /usr/ports/…/…/
And install everything you need from the internet. In the ports collection you'll find the latest versions of the packages released in March, when 7.0-RELEASE appeared Of course this job is very tiresome and tricky(it will take you a couple of days to install the software and customize the kernel), but in the end you'll get a very, very cool modern system, to which no Linux distribution (except Slackware-12.1, of course)compares.
Tip: cd /usr/ports
make search name=nvidia
………………………………………………………
cd /usr/ports/x11/nvidia-driver-71xxx
make install clean
………………………………………………………. and so on.
P.S. Ne izdevaysea nad russkim yazikom!

Post #: 3

RE: Сборка DVD диска - 2008-08-17 15:15:59.103333

mobydick

Сообщений: 354
Оценки: 0
Присоединился: 2008-08-08 01:16:49.146666

Much thanks for the links. I was looking for such stuff . Hey. tuxie, what Linux distribution do you master?

Post #: 4

RE: Сборка DVD диска - 2008-08-17 15:17:09.356666

Fad.Mypl

Сообщений: 49
Оценки: 0
Присоединился: 2008-08-13 13:17:23.186666

Я гуглом пользовался, и мне выдавал он в основном варианты под никс, а как это реализовать в винде не было. И эти все ссылки прошёл.

Post #: 5

RE: Сборка DVD диска - 2008-08-17 16:43:52.653333

tuxmashine

Сообщений: 303
Оценки: 0
Присоединился: 2008-06-03 12:37:50.110000

quote:

Я гуглом пользовался, и мне выдавал он в основном варианты под никс, а как это реализовать в винде не было. И эти все ссылки прошёл.

ты что сразу с винды пересесть хочешь на фрю? молодец парень, но сначала бы взял что полегче

Post #: 6

RE: Сборка DVD диска - 2008-08-17 19:47:08.666666

_spectre_

Сообщений: 126
Оценки: 0
Присоединился: 2008-07-11 01:04:59.650000

quote:

ORIGINAL: tuxmashine

quote:

Я гуглом пользовался, и мне выдавал он в основном варианты под никс, а как это реализовать в винде не было. И эти все ссылки прошёл.

ты что сразу с винды пересесть хочешь на фрю? молодец парень, но сначала бы взял что полегче

нечего, будет ему школой выживания, я выжил, посмотрим как у него это выйдет=))

Post #: 7

RE: Сборка DVD диска - 2008-08-18 09:35:38.320000

Fad.Mypl

Сообщений: 49
Оценки: 0
Присоединился: 2008-08-13 13:17:23.186666

Я уже дистрибутивов 20 перепробовал) И на фряхе давно сидел, тока как на серверном варианте, сейчас хочу поставить и заточить под десктопные нужды ну и там по мелочи. А с винды спрашиваю потому что архивы там лежат, и неохото снова по десять раз болванки туда сюда менять =)

Post #: 8

RE: Сборка DVD диска - 2008-08-19 20:20:21.090000

tuxmashine

Сообщений: 303
Оценки: 0
Присоединился: 2008-06-03 12:37:50.110000

quote:

А с винды спрашиваю потому что архивы там лежат, и неохото снова по десять раз болванки туда сюда менять =)

драйвера нтфс чтоли нету? попробуй с лайв сиди что-нибуть зафигачить

Post #: 9

RE: Сборка DVD диска - 2008-08-20 12:02:32.876666

Fad.Mypl

Сообщений: 49
Оценки: 0
Присоединился: 2008-08-13 13:17:23.186666


 Copyright (c) 1992-2008 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 	The Regents of the University of California. All rights reserved.
 FreeBSD is a registered trademark of The FreeBSD Foundation.
 FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008
     root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
 Timecounter "i8254" frequency 1193182 Hz quality 0
 CPU: Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz (2337.67-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
   Features=0xbfebfbff&lt;FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE&gt;
   Features2=0xe3fd&lt;SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM&gt;
   AMD Features=0x20100000&lt;NX,LM&gt;
   AMD Features2=0x1&lt;LAHF&gt;
   Cores per package: 2
 real memory  = 2146959360 (2047 MB)
 avail memory = 2083012608 (1986 MB)
 ACPI APIC Table: &lt;A_M_I_ OEMAPIC &gt;
 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
 ioapic0 &lt;Version 2.0&gt; irqs 0-23 on motherboard
 kbd1 at kbdmux0
 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
 hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27)
 acpi0: &lt;A_M_I_ OEMRSDT&gt; on motherboard
 acpi0: [ITHREAD]
 acpi0: Power Button (fixed)
 acpi0: reservation of 0, a0000 (3) failed
 acpi0: reservation of 100000, 7ff00000 (3) failed
 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
 acpi_timer0: &lt;24-bit timer at 3.579545MHz&gt; port 0x808-0x80b on acpi0
 acpi_hpet0: &lt;High Precision Event Timer&gt; iomem 0xfed00000-0xfed003ff on acpi0
 Timecounter "HPET" frequency 14318180 Hz quality 900
 cpu0: &lt;ACPI CPU&gt; on acpi0
 ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] -  CF, should be C6 [20070320]
 est0: &lt;Enhanced SpeedStep Frequency Control&gt; on cpu0
 p4tcc0: &lt;CPU Frequency Thermal Control&gt; on cpu0
 cpu1: &lt;ACPI CPU&gt; on acpi0
 est1: &lt;Enhanced SpeedStep Frequency Control&gt; on cpu1
 p4tcc1: &lt;CPU Frequency Thermal Control&gt; on cpu1
 pcib0: &lt;ACPI Host-PCI bridge&gt; port 0xcf8-0xcff on acpi0
 pci0: &lt;ACPI PCI bus&gt; on pcib0
 pcib1: &lt;ACPI PCI-PCI bridge&gt; irq 16 at device 1.0 on pci0
 pci1: &lt;ACPI PCI bus&gt; on pcib1
 vgapci0: &lt;VGA-compatible display&gt; port 0xbc00-0xbc7f mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfa000000-0xfbffffff irq 16 at device 0.0 on pci1
 nvidia0: &lt;GeForce 8800 GT&gt; on vgapci0
 vgapci0: child nvidia0 requested pci_enable_busmaster
 vgapci0: child nvidia0 requested pci_enable_io
 nvidia0: [GIANT-LOCKED]
 nvidia0: [ITHREAD]
 uhci0: &lt;UHCI (generic) USB controller&gt; port 0xa800-0xa81f irq 16 at device 26.0 on pci0
 uhci0: [GIANT-LOCKED]
 uhci0: [ITHREAD]
 usb0: &lt;UHCI (generic) USB controller&gt; on uhci0
 usb0: USB revision 1.0
 uhub0: &lt;Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1&gt; on usb0
 uhub0: 2 ports with 2 removable, self powered
 uhci1: &lt;UHCI (generic) USB controller&gt; port 0xa880-0xa89f irq 21 at device 26.1 on pci0
 uhci1: [GIANT-LOCKED]
 uhci1: [ITHREAD]
 usb1: &lt;UHCI (generic) USB controller&gt; on uhci1
 usb1: USB revision 1.0
 uhub1: &lt;Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1&gt; on usb1
 uhub1: 2 ports with 2 removable, self powered
 uhci2: &lt;UHCI (generic) USB controller&gt; port 0xac00-0xac1f irq 18 at device 26.2 on pci0
 uhci2: [GIANT-LOCKED]
 uhci2: [ITHREAD]
 usb2: &lt;UHCI (generic) USB controller&gt; on uhci2
 usb2: USB revision 1.0
 uhub2: &lt;Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1&gt; on usb2
 uhub2: 2 ports with 2 removable, self powered
 ehci0: &lt;EHCI (generic) USB 2.0 controller&gt; mem 0xf9fffc00-0xf9ffffff irq 18 at device 26.7 on pci0
 ehci0: [GIANT-LOCKED]
 ehci0: [ITHREAD]
 usb3: EHCI version 1.0
 usb3: companion controllers, 2 ports each: usb0 usb1 usb2
 usb3: &lt;EHCI (generic) USB 2.0 controller&gt; on ehci0
 usb3: USB revision 2.0
 uhub3: &lt;Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1&gt; on usb3
 uhub3: 6 ports with 6 removable, self powered
 pci0: &lt;multimedia&gt; at device 27.0 (no driver attached)
 pcib2: &lt;ACPI PCI-PCI bridge&gt; irq 17 at device 28.0 on pci0
 pci4: &lt;ACPI PCI bus&gt; on pcib2
 pcib3: &lt;ACPI PCI-PCI bridge&gt; irq 17 at device 28.4 on pci0
 pci3: &lt;ACPI PCI bus&gt; on pcib3
 atapci0: &lt;Marvell 88SX6101 UDMA133 controller&gt; port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfeaffc00-0xfeaffdff irq 16 at device 0.0 on pci3
 atapci0: [ITHREAD]
 ata2: &lt;ATA channel 0&gt; on atapci0
 ata2: [ITHREAD]
 pcib4: &lt;ACPI PCI-PCI bridge&gt; irq 16 at device 28.5 on pci0
 pci2: &lt;ACPI PCI bus&gt; on pcib4
 mskc0: &lt;Marvell Yukon 88E8056 Gigabit Ethernet&gt; port 0xc800-0xc8ff mem 0xfe9fc000-0xfe9fffff irq 17 at device 0.0 on pci2
 msk0: &lt;Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03&gt; on mskc0
 msk0: Ethernet address: 00:1e:8c:bb:51:b0
 miibus0: &lt;MII bus&gt; on msk0
 e1000phy0: &lt;Marvell 88E1149 Gigabit PHY&gt; PHY 0 on miibus0
 e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
 mskc0: [FILTER]
 uhci3: &lt;UHCI (generic) USB controller&gt; port 0xa080-0xa09f irq 23 at device 29.0 on pci0
 uhci3: [GIANT-LOCKED]
 uhci3: [ITHREAD]
 usb4: &lt;UHCI (generic) USB controller&gt; on uhci3
 usb4: USB revision 1.0
 uhub4: &lt;Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1&gt; on usb4
 uhub4: 2 ports with 2 removable, self powered
 uhci4: &lt;UHCI (generic) USB controller&gt; port 0xa400-0xa41f irq 19 at device 29.1 on pci0
 uhci4: [GIANT-LOCKED]
 uhci4: [ITHREAD]
 usb5: &lt;UHCI (generic) USB controller&gt; on uhci4
 usb5: USB revision 1.0
 uhub5: &lt;Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1&gt; on usb5
 uhub5: 2 ports with 2 removable, self powered
 uhci5: &lt;UHCI (generic) USB controller&gt; port 0xa480-0xa49f irq 18 at device 29.2 on pci0
 uhci5: [GIANT-LOCKED]
 uhci5: [ITHREAD]
 usb6: &lt;UHCI (generic) USB controller&gt; on uhci5
 usb6: USB revision 1.0
 uhub6: &lt;Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1&gt; on usb6
 uhub6: 2 ports with 2 removable, self powered
 ehci1: &lt;EHCI (generic) USB 2.0 controller&gt; mem 0xf9fff800-0xf9fffbff irq 23 at device 29.7 on pci0
 ehci1: [GIANT-LOCKED]
 ehci1: [ITHREAD]
 usb7: EHCI version 1.0
 usb7: companion controllers, 2 ports each: usb4 usb5 usb6
 usb7: &lt;EHCI (generic) USB 2.0 controller&gt; on ehci1
 usb7: USB revision 2.0
 uhub7: &lt;Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1&gt; on usb7
 uhub7: 6 ports with 6 removable, self powered
 pcib5: &lt;ACPI PCI-PCI bridge&gt; at device 30.0 on pci0
 pci5: &lt;ACPI PCI bus&gt; on pcib5
 fwohci0: &lt;VIA Fire II (VT6306)&gt; port 0xec00-0xec7f mem 0xfebff800-0xfebfffff irq 16 at device 3.0 on pci5
 fwohci0: [FILTER]
 fwohci0: OHCI version 1.10 (ROM=1)
 fwohci0: No. of Isochronous channels is 4.
 fwohci0: EUI64 00:1e:8c:00:01:04:23:50
 fwohci0: Phy 1394a available S400, 2 ports.
 fwohci0: Link S400, max_rec 2048 bytes.
 firewire0: &lt;IEEE1394(FireWire) bus&gt; on fwohci0
 dcons_crom0: &lt;dcons configuration ROM&gt; on firewire0
 dcons_crom0: bus_addr 0x1ba8000
 fwe0: &lt;Ethernet over FireWire&gt; on firewire0
 if_fwe0: Fake Ethernet address: 02:1e:8c:04:23:50
 fwe0: Ethernet address: 02:1e:8c:04:23:50
 fwip0: &lt;IP over FireWire&gt; on firewire0
 fwip0: Firewire address: 00:1e:8c:00:01:04:23:50 @ 0xfffe00000000, S400, maxrec 2048
 sbp0: &lt;SBP-2/SCSI over FireWire&gt; on firewire0
 fwohci0: Initiate bus reset
 fwohci0: BUS reset
 fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
 isab0: &lt;PCI-ISA bridge&gt; at device 31.0 on pci0
 isa0: &lt;ISA bus&gt; on isab0
 atapci1: &lt;Intel ICH9 SATA300 controller&gt; port 0x9000-0x9007,0x8c00-0x8c03,0x8880-0x8887,0x8800-0x8803,0x8480-0x848f,0x8400-0x840f irq 22 at device 31.2 on pci0
 atapci1: [ITHREAD]
 ata3: &lt;ATA channel 0&gt; on atapci1
 ata3: [ITHREAD]
 ata4: &lt;ATA channel 1&gt; on atapci1
 ata4: [ITHREAD]
 pci0: &lt;serial bus, SMBus&gt; at device 31.3 (no driver attached)
 atapci2: &lt;Intel ICH9 SATA300 controller&gt; port 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f irq 22 at device 31.5 on pci0
 atapci2: [ITHREAD]
 ata5: &lt;ATA channel 0&gt; on atapci2
 ata5: [ITHREAD]
 ata6: &lt;ATA channel 1&gt; on atapci2
 ata6: [ITHREAD]
 acpi_button0: &lt;Power Button&gt; on acpi0
 fdc0: &lt;floppy drive controller (FDE)&gt; port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
 fdc0: [FILTER]
 sio0: configured irq 4 not in bitmap of probed irqs 0
 sio0: port may not be enabled
 sio0: configured irq 4 not in bitmap of probed irqs 0
 sio0: port may not be enabled
 sio0: &lt;16550A-compatible COM port&gt; port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
 sio0: type 16550A
 sio0: [FILTER]
 atkbdc0: &lt;Keyboard controller (i8042)&gt; port 0x60,0x64 irq 1 on acpi0
 atkbd0: &lt;AT Keyboard&gt; irq 1 on atkbdc0
 kbd0 at atkbd0
 atkbd0: [GIANT-LOCKED]
 atkbd0: [ITHREAD]
 psm0: &lt;PS/2 Mouse&gt; irq 12 on atkbdc0
 psm0: [GIANT-LOCKED]
 psm0: [ITHREAD]
 psm0: model IntelliMouse, device ID 3
 pmtimer0 on isa0
 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
 ata0: [ITHREAD]
 ata1 at port 0x170-0x177,0x376 irq 15 on isa0
 ata1: [ITHREAD]
 ppc0: parallel port not found.
 sc0: &lt;System console&gt; at flags 0x100 on isa0
 sc0: VGA &lt;16 virtual consoles, flags=0x300&gt;
 sio1: configured irq 3 not in bitmap of probed irqs 0
 sio1: port may not be enabled
 vga0: &lt;Generic ISA VGA&gt; at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 Timecounters tick every 1.000 msec
 hptrr: no controller detected.
 firewire0: 1 nodes, maxhop &lt;= 0, cable IRM = 0 (me)
 firewire0: bus manager 0 (me)
 ad6: 305245MB &lt;Seagate ST3320620AS 3.AAG&gt; at ata3-master SATA300
 acd0: DVDR &lt;Optiarc DVD RW AD-7200S/1.05&gt; at ata3-slave SATA150
 SMP: AP CPU #1 Launched!
 Trying to mount root from ufs:/dev/ad6s1a
 msk0: link state changed to UP
 ums0: &lt;Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), class 0/0, rev 1.10/3.00, addr 2&gt; on uhub1
 ums0: 3 buttons and Z dir.
 Waiting (max 60 seconds) for system process `vnlru' to stop...done
 Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
 Waiting (max 60 seconds) for system process `syncer' to stop...
 Syncing disks, vnodes remaining...2 0 2 0 0 0 done
 All buffers synced.
 Copyright (c) 1992-2008 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 	The Regents of the University of California. All rights reserved.
 FreeBSD is a registered trademark of The FreeBSD Foundation.
 FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008
     root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
 Timecounter "i8254" frequency 1193182 Hz quality 0
 CPU: Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz (2337.66-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
   Features=0xbfebfbff&lt;FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE&gt;
   Features2=0xe3fd&lt;SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM&gt;
   AMD Features=0x20100000&lt;NX,LM&gt;
   AMD Features2=0x1&lt;LAHF&gt;
   Cores per package: 2
 real memory  = 2146959360 (2047 MB)
 avail memory = 2083012608 (1986 MB)
 ACPI APIC Table: &lt;A_M_I_ OEMAPIC &gt;
 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
 ioapic0 &lt;Version 2.0&gt; irqs 0-23 on motherboard
 kbd1 at kbdmux0
 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
 hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27)
 acpi0: &lt;A_M_I_ OEMRSDT&gt; on motherboard
 acpi0: [ITHREAD]
 acpi0: Power Button (fixed)
 acpi0: reservation of 0, a0000 (3) failed
 acpi0: reservation of 100000, 7ff00000 (3) failed
 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
 acpi_timer0: &lt;24-bit timer at 3.579545MHz&gt; port 0x808-0x80b on acpi0
 acpi_hpet0: &lt;High Precision Event Timer&gt; iomem 0xfed00000-0xfed003ff on acpi0
 Timecounter "HPET" frequency 14318180 Hz quality 900
 cpu0: &lt;ACPI CPU&gt; on acpi0
 ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] -  CF, should be C6 [20070320]
 est0: &lt;Enhanced SpeedStep Frequency Control&gt; on cpu0
 p4tcc0: &lt;CPU Frequency Thermal Control&gt; on cpu0
 cpu1: &lt;ACPI CPU&gt; on acpi0
 est1: &lt;Enhanced SpeedStep Frequency Control&gt; on cpu1
 p4tcc1: &lt;CPU Frequency Thermal Control&gt; on cpu1
 pcib0: &lt;ACPI Host-PCI bridge&gt; port 0xcf8-0xcff on acpi0
 pci0: &lt;ACPI PCI bus&gt; on pcib0
 pcib1: &lt;ACPI PCI-PCI bridge&gt; irq 16 at device 1.0 on pci0
 pci1: &lt;ACPI PCI bus&gt; on pcib1
 vgapci0: &lt;VGA-compatible display&gt; port 0xbc00-0xbc7f mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfa000000-0xfbffffff irq 16 at device 0.0 on pci1
 nvidia0: &lt;GeForce 8800 GT&gt; on vgapci0
 vgapci0: child nvidia0 requested pci_enable_busmaster
 vgapci0: child nvidia0 requested pci_enable_io
 nvidia0: [GIANT-LOCKED]
 nvidia0: [ITHREAD]
 uhci0: &lt;UHCI (generic) USB controller&gt; port 0xa800-0xa81f irq 16 at device 26.0 on pci0
 uhci0: [GIANT-LOCKED]
 uhci0: [ITHREAD]
 usb0: &lt;UHCI (generic) USB controller&gt; on uhci0
 usb0: USB revision 1.0
 uhub0: &lt;Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1&gt; on usb0
 uhub0: 2 ports with 2 removable, self powered
 uhci1: &lt;UHCI (generic) USB controller&gt; port 0xa880-0xa89f irq 21 at device 26.1 on pci0
 uhci1: [GIANT-LOCKED]
 uhci1: [ITHREAD]
 usb1: &lt;UHCI (generic) USB controller&gt; on uhci1
 usb1: USB revision 1.0
 uhub1: &lt;Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1&gt; on usb1
 uhub1: 2 ports with 2 removable, self powered
 uhci2: &lt;UHCI (generic) USB controller&gt; port 0xac00-0xac1f irq 18 at device 26.2 on pci0
 uhci2: [GIANT-LOCKED]
 uhci2: [ITHREAD]
 usb2: &lt;UHCI (generic) USB controller&gt; on uhci2
 usb2: USB revision 1.0
 uhub2: &lt;Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1&gt; on usb2
 uhub2: 2 ports with 2 removable, self powered
 ehci0: &lt;EHCI (generic) USB 2.0 controller&gt; mem 0xf9fffc00-0xf9ffffff irq 18 at device 26.7 on pci0
 ehci0: [GIANT-LOCKED]
 ehci0: [ITHREAD]
 usb3: EHCI version 1.0
 usb3: companion controllers, 2 ports each: usb0 usb1 usb2
 usb3: &lt;EHCI (generic) USB 2.0 controller&gt; on ehci0
 usb3: USB revision 2.0
 uhub3: &lt;Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1&gt; on usb3
 uhub3: 6 ports with 6 removable, self powered
 pci0: &lt;multimedia&gt; at device 27.0 (no driver attached)
 pcib2: &lt;ACPI PCI-PCI bridge&gt; irq 17 at device 28.0 on pci0
 pci4: &lt;ACPI PCI bus&gt; on pcib2
 pcib3: &lt;ACPI PCI-PCI bridge&gt; irq 17 at device 28.4 on pci0
 pci3: &lt;ACPI PCI bus&gt; on pcib3
 atapci0: &lt;Marvell 88SX6101 UDMA133 controller&gt; port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfeaffc00-0xfeaffdff irq 16 at device 0.0 on pci3
 atapci0: [ITHREAD]
 ata2: &lt;ATA channel 0&gt; on atapci0
 ata2: [ITHREAD]
 pcib4: &lt;ACPI PCI-PCI bridge&gt; irq 16 at device 28.5 on pci0
 pci2: &lt;ACPI PCI bus&gt; on pcib4
 mskc0: &lt;Marvell Yukon 88E8056 Gigabit Ethernet&gt; port 0xc800-0xc8ff mem 0xfe9fc000-0xfe9fffff irq 17 at device 0.0 on pci2
 msk0: &lt;Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03&gt; on mskc0
 msk0: Ethernet address: 00:1e:8c:bb:51:b0
 miibus0: &lt;MII bus&gt; on msk0
 e1000phy0: &lt;Marvell 88E1149 Gigabit PHY&gt; PHY 0 on miibus0
 e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
 mskc0: [FILTER]
 uhci3: &lt;UHCI (generic) USB controller&gt; port 0xa080-0xa09f irq 23 at device 29.0 on pci0
 uhci3: [GIANT-LOCKED]
 uhci3: [ITHREAD]
 usb4: &lt;UHCI (generic) USB controller&gt; on uhci3
 usb4: USB revision 1.0
 uhub4: &lt;Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1&gt; on usb4
 uhub4: 2 ports with 2 removable, self powered
 uhci4: &lt;UHCI (generic) USB controller&gt; port 0xa400-0xa41f irq 19 at device 29.1 on pci0
 uhci4: [GIANT-LOCKED]
 uhci4: [ITHREAD]
 usb5: &lt;UHCI (generic) USB controller&gt; on uhci4
 usb5: USB revision 1.0
 uhub5: &lt;Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1&gt; on usb5
 uhub5: 2 ports with 2 removable, self powered
 uhci5: &lt;UHCI (generic) USB controller&gt; port 0xa480-0xa49f irq 18 at device 29.2 on pci0
 uhci5: [GIANT-LOCKED]
 uhci5: [ITHREAD]
 usb6: &lt;UHCI (generic) USB controller&gt; on uhci5
 usb6: USB revision 1.0
 uhub6: &lt;Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1&gt; on usb6
 uhub6: 2 ports with 2 removable, self powered
 ehci1: &lt;EHCI (generic) USB 2.0 controller&gt; mem 0xf9fff800-0xf9fffbff irq 23 at device 29.7 on pci0
 ehci1: [GIANT-LOCKED]
 ehci1: [ITHREAD]
 usb7: EHCI version 1.0
 usb7: companion controllers, 2 ports each: usb4 usb5 usb6
 usb7: &lt;EHCI (generic) USB 2.0 controller&gt; on ehci1
 usb7: USB revision 2.0
 uhub7: &lt;Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1&gt; on usb7
 uhub7: 6 ports with 6 removable, self powered
 pcib5: &lt;ACPI PCI-PCI bridge&gt; at device 30.0 on pci0
 pci5: &lt;ACPI PCI bus&gt; on pcib5
 fwohci0: &lt;VIA Fire II (VT6306)&gt; port 0xec00-0xec7f mem 0xfebff800-0xfebfffff irq 16 at device 3.0 on pci5
 fwohci0: [FILTER]
 fwohci0: OHCI version 1.10 (ROM=1)
 fwohci0: No. of Isochronous channels is 4.
 fwohci0: EUI64 00:1e:8c:00:01:04:23:50
 fwohci0: Phy 1394a available S400, 2 ports.
 fwohci0: Link S400, max_rec 2048 bytes.
 firewire0: &lt;IEEE1394(FireWire) bus&gt; on fwohci0
 dcons_crom0: &lt;dcons configuration ROM&gt; on firewire0
 dcons_crom0: bus_addr 0x1ba8000
 fwe0: &lt;Ethernet over FireWire&gt; on firewire0
 if_fwe0: Fake Ethernet address: 02:1e:8c:04:23:50
 fwe0: Ethernet address: 02:1e:8c:04:23:50
 fwip0: &lt;IP over FireWire&gt; on firewire0
 fwip0: Firewire address: 00:1e:8c:00:01:04:23:50 @ 0xfffe00000000, S400, maxrec 2048
 sbp0: &lt;SBP-2/SCSI over FireWire&gt; on firewire0
 fwohci0: Initiate bus reset
 fwohci0: BUS reset
 fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
 isab0: &lt;PCI-ISA bridge&gt; at device 31.0 on pci0
 isa0: &lt;ISA bus&gt; on isab0
 atapci1: &lt;Intel ICH9 SATA300 controller&gt; port 0x9000-0x9007,0x8c00-0x8c03,0x8880-0x8887,0x8800-0x8803,0x8480-0x848f,0x8400-0x840f irq 22 at device 31.2 on pci0
 atapci1: [ITHREAD]
 ata3: &lt;ATA channel 0&gt; on atapci1
 ata3: [ITHREAD]
 ata4: &lt;ATA channel 1&gt; on atapci1
 ata4: [ITHREAD]
 pci0: &lt;serial bus, SMBus&gt; at device 31.3 (no driver attached)
 atapci2: &lt;Intel ICH9 SATA300 controller&gt; port 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f irq 22 at device 31.5 on pci0
 atapci2: [ITHREAD]
 ata5: &lt;ATA channel 0&gt; on atapci2
 ata5: [ITHREAD]
 ata6: &lt;ATA channel 1&gt; on atapci2
 ata6: [ITHREAD]
 acpi_button0: &lt;Power Button&gt; on acpi0
 fdc0: &lt;floppy drive controller (FDE)&gt; port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
 fdc0: [FILTER]
 sio0: configured irq 4 not in bitmap of probed irqs 0
 sio0: port may not be enabled
 sio0: configured irq 4 not in bitmap of probed irqs 0
 sio0: port may not be enabled
 sio0: &lt;16550A-compatible COM port&gt; port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
 sio0: type 16550A
 sio0: [FILTER]
 atkbdc0: &lt;Keyboard controller (i8042)&gt; port 0x60,0x64 irq 1 on acpi0
 atkbd0: &lt;AT Keyboard&gt; irq 1 on atkbdc0
 kbd0 at atkbd0
 atkbd0: [GIANT-LOCKED]
 atkbd0: [ITHREAD]
 psm0: &lt;PS/2 Mouse&gt; irq 12 on atkbdc0
 psm0: [GIANT-LOCKED]
 psm0: [ITHREAD]
 psm0: model IntelliMouse, device ID 3
 pmtimer0 on isa0
 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
 ata0: [ITHREAD]
 ata1 at port 0x170-0x177,0x376 irq 15 on isa0
 ata1: [ITHREAD]
 ppc0: parallel port not found.
 sc0: &lt;System console&gt; at flags 0x100 on isa0
 sc0: VGA &lt;16 virtual consoles, flags=0x300&gt;
 sio1: configured irq 3 not in bitmap of probed irqs 0
 sio1: port may not be enabled
 vga0: &lt;Generic ISA VGA&gt; at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 Timecounters tick every 1.000 msec
 hptrr: no controller detected.
 firewire0: 1 nodes, maxhop &lt;= 0, cable IRM = 0 (me)
 firewire0: bus manager 0 (me)
 ad6: 305245MB &lt;Seagate ST3320620AS 3.AAG&gt; at ata3-master SATA300
 acd0: DVDR &lt;Optiarc DVD RW AD-7200S/1.05&gt; at ata3-slave SATA150
 SMP: AP CPU #1 Launched!
 Trying to mount root from ufs:/dev/ad6s1a
 msk0: link state changed to UP
 ums0: &lt;Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), class 0/0, rev 1.10/3.00, addr 2&gt; on uhub1
 ums0: 3 buttons and Z dir.
 g_vfs_done():acd0[READ(offset=32768, length=2048)]error = 5
 g_vfs_done():acd0[READ(offset=32768, length=2048)]error = 5
 g_vfs_done():acd0[READ(offset=36864, length=2048)]error = 5
 GEOM_LABEL: Label for provider acd0t01 is iso9660/FreeBSD_Packages.
 Waiting (max 60 seconds) for system process `vnlru' to stop...done
 Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
 Waiting (max 60 seconds) for system process `syncer' to stop...
 Syncing disks, vnodes remaining...5 2 0 0 0 done
 All buffers synced.
 Copyright (c) 1992-2008 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 	The Regents of the University of California. All rights reserved.
 FreeBSD is a registered trademark of The FreeBSD Foundation.
 FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008
     root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
 Timecounter "i8254" frequency 1193182 Hz quality 0
 CPU: Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz (2337.67-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
   Features=0xbfebfbff&lt;FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE&gt;
   Features2=0xe3fd&lt;SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM&gt;
   AMD Features=0x20100000&lt;NX,LM&gt;
   AMD Features2=0x1&lt;LAHF&gt;
   Cores per package: 2
 real memory  = 2146959360 (2047 MB)
 avail memory = 2083012608 (1986 MB)
 ACPI APIC Table: &lt;A_M_I_ OEMAPIC &gt;
 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
 ioapic0 &lt;Version 2.0&gt; irqs 0-23 on motherboard
 kbd1 at kbdmux0
 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
 hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27)
 acpi0: &lt;A_M_I_ OEMRSDT&gt; on motherboard
 acpi0: [ITHREAD]
 acpi0: Power Button (fixed)
 acpi0: reservation of 0, a0000 (3) failed
 acpi0: reservation of 100000, 7ff00000 (3) failed
 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 acpi_timer0: &lt;24-bit timer at 3.579545MHz&gt; port 0x808-0x80b on acpi0
 acpi_hpet0: &lt;High Precision Event Timer&gt; iomem 0xfed00000-0xfed003ff on acpi0
 Timecounter "HPET" frequency 14318180 Hz quality 900
 cpu0: &lt;ACPI CPU&gt; on acpi0
 ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] -  CF, should be C6 [20070320]
 est0: &lt;Enhanced SpeedStep Frequency Control&gt; on cpu0
 p4tcc0: &lt;CPU Frequency Thermal Control&gt; on cpu0
 cpu1: &lt;ACPI CPU&gt; on acpi0
 est1: &lt;Enhanced SpeedStep Frequency Control&gt; on cpu1
 p4tcc1: &lt;CPU Frequency Thermal Control&gt; on cpu1
 pcib0: &lt;ACPI Host-PCI bridge&gt; port 0xcf8-0xcff on acpi0
 pci0: &lt;ACPI PCI bus&gt; on pcib0
 pcib1: &lt;ACPI PCI-PCI bridge&gt; irq 16 at device 1.0 on pci0
 pci1: &lt;ACPI PCI bus&gt; on pcib1
 vgapci0: &lt;VGA-compatible display&gt; port 0xbc00-0xbc7f mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfa000000-0xfbffffff irq 16 at device 0.0 on pci1
 nvidia0: &lt;GeForce 8800 GT&gt; on vgapci0
 vgapci0: child nvidia0 requested pci_enable_busmaster
 vgapci0: child nvidia0 requested pci_enable_io
 nvidia0: [GIANT-LOCKED]
 nvidia0: [ITHREAD]
 uhci0: &lt;UHCI (generic) USB controller&gt; port 0xa800-0xa81f irq 16 at device 26.0 on pci0
 uhci0: [GIANT-LOCKED]
 uhci0: [ITHREAD]
 usb0: &lt;UHCI (generic) USB controller&gt; on uhci0
 usb0: USB revision 1.0
 uhub0: &lt;Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1&gt; on usb0
 uhub0: 2 ports with 2 removable, self powered
 uhci1: &lt;UHCI (generic) USB controller&gt; port 0xa880-0xa89f irq 21 at device 26.1 on pci0
 uhci1: [GIANT-LOCKED]
 uhci1: [ITHREAD]
 usb1: &lt;UHCI (generic) USB controller&gt; on uhci1
 usb1: USB revision 1.0
 uhub1: &lt;Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1&gt; on usb1
 uhub1: 2 ports with 2 removable, self powered
 uhci2: &lt;UHCI (generic) USB controller&gt; port 0xac00-0xac1f irq 18 at device 26.2 on pci0
 uhci2: [GIANT-LOCKED]
 uhci2: [ITHREAD]
 usb2: &lt;UHCI (generic) USB controller&gt; on uhci2
 usb2: USB revision 1.0
 uhub2: &lt;Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1&gt; on usb2
 uhub2: 2 ports with 2 removable, self powered
 ehci0: &lt;EHCI (generic) USB 2.0 controller&gt; mem 0xf9fffc00-0xf9ffffff irq 18 at device 26.7 on pci0
 ehci0: [GIANT-LOCKED]
 ehci0: [ITHREAD]
 usb3: EHCI version 1.0
 usb3: companion controllers, 2 ports each: usb0 usb1 usb2
 usb3: &lt;EHCI (generic) USB 2.0 controller&gt; on ehci0
 usb3: USB revision 2.0
 uhub3: &lt;Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1&gt; on usb3
 uhub3: 6 ports with 6 removable, self powered
 pci0: &lt;multimedia&gt; at device 27.0 (no driver attached)
 pcib2: &lt;ACPI PCI-PCI bridge&gt; irq 17 at device 28.0 on pci0
 pci4: &lt;ACPI PCI bus&gt; on pcib2
 pcib3: &lt;ACPI PCI-PCI bridge&gt; irq 17 at device 28.4 on pci0
 pci3: &lt;ACPI PCI bus&gt; on pcib3
 atapci0: &lt;Marvell 88SX6101 UDMA133 controller&gt; port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfeaffc00-0xfeaffdff irq 16 at device 0.0 on pci3
 atapci0: [ITHREAD]
 ata2: &lt;ATA channel 0&gt; on atapci0
 ata2: [ITHREAD]
 pcib4: &lt;ACPI PCI-PCI bridge&gt; irq 16 at device 28.5 on pci0
 pci2: &lt;ACPI PCI bus&gt; on pcib4
 mskc0: &lt;Marvell Yukon 88E8056 Gigabit Ethernet&gt; port 0xc800-0xc8ff mem 0xfe9fc000-0xfe9fffff irq 17 at device 0.0 on pci2
 msk0: &lt;Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03&gt; on mskc0
 msk0: Ethernet address: 00:1e:8c:bb:51:b0
 miibus0: &lt;MII bus&gt; on msk0
 e1000phy0: &lt;Marvell 88E1149 Gigabit PHY&gt; PHY 0 on miibus0
 e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
 mskc0: [FILTER]
 uhci3: &lt;UHCI (generic) USB controller&gt; port 0xa080-0xa09f irq 23 at device 29.0 on pci0
 uhci3: [GIANT-LOCKED]
 uhci3: [ITHREAD]
 usb4: &lt;UHCI (generic) USB controller&gt; on uhci3
 usb4: USB revision 1.0
 uhub4: &lt;Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1&gt; on usb4
 uhub4: 2 ports with 2 removable, self powered
 uhci4: &lt;UHCI (generic) USB controller&gt; port 0xa400-0xa41f irq 19 at device 29.1 on pci0
 uhci4: [GIANT-LOCKED]
 uhci4: [ITHREAD]
 usb5: &lt;UHCI (generic) USB controller&gt; on uhci4
 usb5: USB revision 1.0
 uhub5: &lt;Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1&gt; on usb5
 uhub5: 2 ports with 2 removable, self powered
 uhci5: &lt;UHCI (generic) USB controller&gt; port 0xa480-0xa49f irq 18 at device 29.2 on pci0
 uhci5: [GIANT-LOCKED]
 uhci5: [ITHREAD]
 usb6: &lt;UHCI (generic) USB controller&gt; on uhci5
 usb6: USB revision 1.0
 uhub6: &lt;Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1&gt; on usb6
 uhub6: 2 ports with 2 removable, self powered
 ehci1: &lt;EHCI (generic) USB 2.0 controller&gt; mem 0xf9fff800-0xf9fffbff irq 23 at device 29.7 on pci0
 ehci1: [GIANT-LOCKED]
 ehci1: [ITHREAD]
 usb7: EHCI version 1.0
 usb7: companion controllers, 2 ports each: usb4 usb5 usb6
 usb7: &lt;EHCI (generic) USB 2.0 controller&gt; on ehci1
 usb7: USB revision 2.0
 uhub7: &lt;Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1&gt; on usb7
 uhub7: 6 ports with 6 removable, self powered
 pcib5: &lt;ACPI PCI-PCI bridge&gt; at device 30.0 on pci0
 pci5: &lt;ACPI PCI bus&gt; on pcib5
 fwohci0: &lt;VIA Fire II (VT6306)&gt; port 0xec00-0xec7f mem 0xfebff800-0xfebfffff irq 16 at device 3.0 on pci5
 fwohci0: [FILTER]
 fwohci0: OHCI version 1.10 (ROM=1)
 fwohci0: No. of Isochronous channels is 4.
 fwohci0: EUI64 00:1e:8c:00:01:04:23:50
 fwohci0: Phy 1394a available S400, 2 ports.
 fwohci0: Link S400, max_rec 2048 bytes.
 firewire0: &lt;IEEE1394(FireWire) bus&gt; on fwohci0
 dcons_crom0: &lt;dcons configuration ROM&gt; on firewire0
 dcons_crom0: bus_addr 0x1ba8000
 fwe0: &lt;Ethernet over FireWire&gt; on firewire0
 if_fwe0: Fake Ethernet address: 02:1e:8c:04:23:50
 fwe0: Ethernet address: 02:1e:8c:04:23:50
 fwip0: &lt;IP over FireWire&gt; on firewire0
 fwip0: Firewire address: 00:1e:8c:00:01:04:23:50 @ 0xfffe00000000, S400, maxrec 2048
 sbp0: &lt;SBP-2/SCSI over FireWire&gt; on firewire0
 fwohci0: Initiate bus reset
 fwohci0: BUS reset
 fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
 isab0: &lt;PCI-ISA bridge&gt; at device 31.0 on pci0
 isa0: &lt;ISA bus&gt; on isab0
 atapci1: &lt;Intel ICH9 SATA300 controller&gt; port 0x9000-0x9007,0x8c00-0x8c03,0x8880-0x8887,0x8800-0x8803,0x8480-0x848f,0x8400-0x840f irq 22 at device 31.2 on pci0
 atapci1: [ITHREAD]
 ata3: &lt;ATA channel 0&gt; on atapci1
 ata3: [ITHREAD]
 ata4: &lt;ATA channel 1&gt; on atapci1
 ata4: [ITHREAD]
 pci0: &lt;serial bus, SMBus&gt; at device 31.3 (no driver attached)
 atapci2: &lt;Intel ICH9 SATA300 controller&gt; port 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f irq 22 at device 31.5 on pci0
 atapci2: [ITHREAD]
 ata5: &lt;ATA channel 0&gt; on atapci2
 ata5: [ITHREAD]
 ata6: &lt;ATA channel 1&gt; on atapci2
 ata6: [ITHREAD]
 acpi_button0: &lt;Power Button&gt; on acpi0
 fdc0: &lt;floppy drive controller (FDE)&gt; port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
 fdc0: [FILTER]
 sio0: configured irq 4 not in bitmap of probed irqs 0
 sio0: port may not be enabled
 sio0: configured irq 4 not in bitmap of probed irqs 0
 sio0: port may not be enabled
 sio0: &lt;16550A-compatible COM port&gt; port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
 sio0: type 16550A
 sio0: [FILTER]
 atkbdc0: &lt;Keyboard controller (i8042)&gt; port 0x60,0x64 irq 1 on acpi0
 atkbd0: &lt;AT Keyboard&gt; irq 1 on atkbdc0
 kbd0 at atkbd0
 atkbd0: [GIANT-LOCKED]
 atkbd0: [ITHREAD]
 psm0: &lt;PS/2 Mouse&gt; irq 12 on atkbdc0
 psm0: [GIANT-LOCKED]
 psm0: [ITHREAD]
 psm0: model IntelliMouse, device ID 3
 pmtimer0 on isa0
 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
 ata0: [ITHREAD]
 ata1 at port 0x170-0x177,0x376 irq 15 on isa0
 ata1: [ITHREAD]
 ppc0: parallel port not found.
 sc0: &lt;System console&gt; at flags 0x100 on isa0
 sc0: VGA &lt;16 virtual consoles, flags=0x300&gt;
 sio1: configured irq 3 not in bitmap of probed irqs 0
 sio1: port may not be enabled
 vga0: &lt;Generic ISA VGA&gt; at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 Timecounters tick every 1.000 msec
 hptrr: no controller detected.
 firewire0: 1 nodes, maxhop &lt;= 0, cable IRM = 0 (me)
 firewire0: bus manager 0 (me)
 ad6: 305245MB &lt;Seagate ST3320620AS 3.AAG&gt; at ata3-master SATA300
 acd0: DVDR &lt;Optiarc DVD RW AD-7200S/1.05&gt; at ata3-slave SATA150
 GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Packages_2.
 SMP: AP CPU #1 Launched!
 Trying to mount root from ufs:/dev/ad6s1a
 msk0: link state changed to UP
 ums0: &lt;Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), class 0/0, rev 1.10/3.00, addr 2&gt; on uhub1
 ums0: 3 buttons and Z dir.
 pid 9341 (conftest), uid 0: exited on signal 12 (core dum

Post #: 10

RE: Сборка DVD диска - 2008-08-20 15:23:17.483333

mobydick

Сообщений: 354
Оценки: 0
Присоединился: 2008-08-08 01:16:49.146666

Ia otcliutschil iz konfiguratsii iavno nenujnyie optsii i devaisy. Prietom ia vkliutschil drugoi devais kotoryi
tebe naverneaka ponadobitsea : atapicam - etot devais pomogaet mne iuzati cdrecord na ATAPI privode, a u tebea kak vidno Optiarch DVD kak i u menea.
ntfs , msdosfs , cd9660 Ia oformil kak zagrujaiemyie moduli.

U tebea naverneaka zvukovaia karta ot RealTek , poetomu hda (High Definition Audio) budet otvetschati za muzycalinuiu tschasti na tvoiom servere. Esli u tebea v nalitschii drugaia carta, bystro soobshtschi na forum
i ia vnesu nujnyie popravlenia.

cpu       HAMMER
ident       CUSTOM_AMD64

makeoptions   MODULES_OVERRIDE="msdosfs cd9660 ntfs linux acpi sound/sound sound/driver/hda"

options    SCHED_4BSD       # 4BSD scheduler
options    PREEMPTION       # Enable kernel thread preemption
options    INET           # InterNETworking
options    INET6           # IPv6 communications protocols
options    FFS           # Berkeley Fast Filesystem
options    SOFT..S       # Enable FFS soft ..s support
options    UFS_ACL           # Support for access control lists
options    UFS_GJOURNAL       # Enable gjournal-based UFS journaling
options    PROCFS           # Process filesystem (requires PSEUDOFS)
options    PSEUDOFS       # Pseudo-filesystem framework
options    GEOM_PART_GPT       # GUID Partition Tables.
options    GEOM_LABEL       # Provides labelization
options    COMPAT_43TTY       # BSD 4.3 TTY compat [KEEP THIS!]
options    COMPAT_IA32       # Compatible with i386 binaries
options    COMPAT_FREEBSD4       # Compatible with FreeBSD4
options    COMPAT_FREEBSD5       # Compatible with FreeBSD5
options    COMPAT_FREEBSD6       # Compatible with FreeBSD6
options    SYSVSHM           # SYSV-style shared memory
options    SYSVMSG           # SYSV-style message queues
options    SYSVSEM           # SYSV-style semaphores
options    ADAPTIVE_GIANT       # Giant mutex is adaptive.
# Make an SMP-capable kernel by default
options    SMP           # Symmetric MultiProcessor Kernel

# CPU frequency control
device       cpufreq

# Bus support.
device       acpi
device       pci

# Floppy drives
device       fdc

# ATA and ATAPI devices
device       ata
device       atadisk       # ATA disk drives
device       atapicd       # ATAPI CDROM drives
device       atapifd       # ATAPI floppy drives
device       atapicam

# SCSI peripherals
device       scbus       # SCSI bus (required for SCSI)
device       da       # Direct Access (disks)
device       cd       # CD
device       pass       # Passthrough device (direct SCSI access)
# atkbdc0 controls both the keyboard and the PS/2 mouse
device       atkbdc       # AT keyboard controller
device       atkbd       # AT keyboard
device       psm       # PS/2 mouse
device       kbdmux       # keyboard multiplexer
device       vga       # VGA video card driver

#device       splash       # Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device sc
device       agp       # support several AGP chipsets

# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
#device       cbb       # cardbus (yenta) bridge
#device       pccard       # PC Card (16-bit) bus
#device       cardbus       # CardBus (32-bit) bus

# Serial (COM) ports
device       sio       # 8250, 16[45]50 based serial ports
device       uart       # Generic UART driver

# Parallel port
#device       ppc
device       ppbus       # Parallel port bus (required)
device       lpt       # Printer
device       plip       # TCP/IP over parallel
device       ppi       # Parallel port interface device
#device       vpo       # Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to sio, uart and/or ppc drivers):
#device       puc

# PCI Ethernet NICs.
#device       de       # DEC/Intel DC21x4x (``Tulip'')
#device       em       # Intel PRO/1000 adapter Gigabit Ethernet Card
#device       ixgb       # Intel PRO/10GbE Ethernet Card
#device       le       # AMD Am7900 LANCE and Am79C9xx PCnet
#device       txp       # 3Com 3cR990 (``Typhoon'')
#device       vx       # 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device       miibus       # MII bus support
#device       bce       # Broadcom BCM5706/BCM5708 Gigabit Ethernet
#device       bfe       # Broadcom BCM440x 10/100 Ethernet
#device       bge       # Broadcom BCM570xx Gigabit Ethernet
#device       dc       # DEC/Intel 21143 and various workalikes
#device       fxp       # Intel EtherExpress PRO/100B (82557, 82558)
#device       lge       # Level 1 LXT1001 gigabit Ethernet
device       msk       # Marvell/SysKonnect Yukon II Gigabit Ethernet
#device       nfe       # nVidia nForce MCP on-board Ethernet
#device       nge       # NatSemi DP83820 gigabit Ethernet
#device       nve       # nVidia nForce MCP on-board Ethernet Networking
#device       pcn       # AMD Am79C97x PCI 10/100 (precedence over 'le')
#device       re       # RealTek 8139C+/8169/8169S/8110S
#device       rl       # RealTek 8129/8139
#device       sf       # Adaptec AIC-6915 (``Starfire'')
#device       sis       # Silicon Integrated Systems SiS 900/SiS 7016
#device       sk       # SysKonnect SK-984x & SK-982x gigabit Ethernet
#device       ste       # Sundance ST201 (D-Link DFE-550TX)
#device       ti       # Alteon Networks Tigon I/II gigabit Ethernet
#device       tl       # Texas Instruments ThunderLAN
#device       tx       # SMC EtherPower II (83c170 ``EPIC'')
#device       vge       # VIA VT612x gigabit Ethernet
#device       vr       # VIA Rhine, Rhine II
#device       wb       # Winbond W89C840F
#device       xl       # 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs. pccard NICs included.
device       cs       # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device       ed       # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device       ex       # Intel EtherExpress Pro/10 and Pro/10+
#device       ep       # Etherlink III based cards
#device       fe       # Fujitsu MB8696x based cards
#device       sn       # SMC's 9000 series of Ethernet chips
#device       xe       # Xircom pccard Ethernet

# Wireless NIC cards
#device       wlan       # 802.11 support
#device       wlan_wep   # 802.11 WEP support
#device       wlan_ccmp   # 802.11 CCMP support
#device       wlan_tkip   # 802.11 TKIP support
#device       wlan_amrr   # AMRR transmit rate control algorithm
#device       wlan_scan_ap   # 802.11 AP mode scanning
#device       wlan_scan_sta   # 802.11 STA mode scanning
#device       an       # Aironet 4500/4800 802.11 wireless NICs.
#device       ath       # Atheros pci/cardbus NIC's
#device       ath_hal       # Atheros HAL (Hardware Access Layer)
#device       ath_rate_sample   # SampleRate tx rate control for ath
#device       awi       # BayStack 660 and others
#device       ral       # Ralink Technology RT2500 wireless NICs.
#device       wi       # WaveLAN/Intersil/Symbol 802.11 wireless NICs.

# Pseudo devices.
device       loop       # Network loopback
device       random       # Entropy device
device       ether       # Ethernet support
device       sl       # Kernel SLIP
device       ppp       # Kernel PPP
device       tun       # Packet tunnel.
device       pty       # Pseudo-ttys (telnet etc)
device       md       # Memory "disks"
device       gif       # IPv6 and IPv4 tunneling
device       faith       # IPv6-to-IPv4 relaying (translation)
#device       firmware   # firmware assist module

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device       bpf       # Berkeley packet filter

# USB support
device       uhci       # UHCI PCI->USB interface
device       ohci       # OHCI PCI->USB interface
device       ehci       # EHCI PCI->USB interface (USB 2.0)
device       usb       # USB Bus (required)
#device       udbp       # USB Double Bulk Pipe devices
#device       ugen       # Generic
#device       uhid       # "Human Interface Devices"
#device       ukbd       # Keyboard
#device       ulpt       # Printer
device       umass       # Disks/Mass storage - Requires scbus and da
#device       ums       # Mouse
#device       ural       # Ralink Technology RT2500USB wireless NICs
#device       urio       # Diamond Rio 500 MP3 player
#device       uscanner   # Scanners
# USB Ethernet, requires miibus
#device       aue       # ADMtek USB Ethernet
#device       axe       # ASIX Electronics USB Ethernet
#device       cdce       # Generic USB over Ethernet
#device       cue       # CATC USB Ethernet
#device       kue       # Kawasaki LSI USB Ethernet
#device       rue       # RealTek RTL8150 USB Ethernet

# FireWire support
device       firewire   # FireWire bus code
device       sbp       # SCSI over FireWire (Requires scbus and da)
device       fwe       # Ethernet over FireWire (non-standard!)
device       fwip       # IP over FireWire (RFC 2734,3146)
device       dcons       # Dumb console driver
device       dcons_crom   # Configuration ROM for dcons

v kataloghe /usr/src/sys/amd64/conf/ sdelai kopiu GENERIC pod imenem CUSTOM_AMD64
Dalishe ~# cd /usr/src/ && make buildkernel KERNCONF=CUSTOM
Poskoliku ia podobral toliko nescoliko modulei, vesi protses zaimet ne bolee 20 min.
Esli polutschishi soobshtschenie tipa >>> KERNEL build complete ……..>>>>
Togda vse OK
~#:init 1
~#:cd /usr/src/ && make installkernel KERNCONF=CUSTOM_AMD64
~#:shutdown -r now
Konets sveazi.
Jdu novyh soobshtschenii.

Post #: 11

RE: Сборка DVD диска - 2008-08-20 15:34:51.816666

Fad.Mypl

Сообщений: 49
Оценки: 0
Присоединился: 2008-08-13 13:17:23.186666

1й вопрос. Это ядро на 64 систему, или мне кажеться? (У меня стоит 32 битная.)
2й вопрос. Создать файл CUSTOM_I386 например, и скопировать туда данный txt, я правильно понял?
далее просто набрать
cd /usr/src/ && make buildkernel KERNCONF=CUSTOM
и пойдёт компиляция?
Потом его исталять, и запустить?

Post #: 12

RE: Сборка DVD диска - 2008-08-20 15:56:32.153333

mobydick

Сообщений: 354
Оценки: 0
Присоединился: 2008-08-08 01:16:49.146666

Ne toropisi poka .Shtschias ia otredaktiruiu novyi fail dlea arhitectury x686!
U tebea okazyvaietsea Genuine Intel, a eto meneaiet configuratsiu.

Post #: 13

RE: Сборка DVD диска - 2008-08-20 17:59:48.950000

mobydick

Сообщений: 354
Оценки: 0
Присоединился: 2008-08-08 01:16:49.146666

Hello, Fad.Mypl
I've got news for you.
Delai tak: ~#:cd /usr/src/sys/i386/conf/ && cp GENERIC SMP
Otredaktirui SMP po obraztsu privedennomu nije:
~#:ee SMP  ili ~#: vi SMP
ne dopuskai sintacsitscheskih oshibok. Esli make natkneotsea na takuiu oshibku on ukajet nomer stroki s oshibkoi.
Togda ~#:ee + n /../../../SMP
#
# GENERIC – Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.474.2.2.2.1 2008/02/06 03:24:28 scottl Exp $

cpu        I686_CPU
ident        SMP

# To statically compile in device wiring instead of /boot/device.hints
#hints        "GENERIC.hints"        # Default places to look for devices.
makeoptions    MODULES_OVERRIDE="acpi ntfs msdosfs cd9660 linux sound/sound sound/driver/hda"
#makeoptions    DEBUG=-g        # Build kernel with gdb(1) debug symbols

options     SCHED_4BSD        # 4BSD scheduler
options     PREEMPTION        # Enable kernel thread preemption
options     INET            # InterNETworking
options     INET6            # IPv6 communications protocols
#options     SCTP            # Stream Control Transmission Protocol
options     FFS            # Berkeley Fast Filesystem
options     SOFT..S        # Enable FFS soft ..s support
options     UFS_ACL            # Support for access control lists
#options     UFS_DIRHASH        # Improve performance on big directories
options     UFS_GJOURNAL        # Enable gjournal-based UFS journaling
#options     MD_ROOT            # MD is a potential root device
#options     NFSCLIENT        # Network Filesystem Client
#options     NFSSERVER        # Network Filesystem Server
#options     NFS_ROOT        # NFS usable as /, requires NFSCLIENT
#options     MSDOSFS            # MSDOS Filesystem
#options     CD9660            # ISO 9660 Filesystem
options     PROCFS            # Process filesystem (requires PSEUDOFS)
options     PSEUDOFS        # Pseudo-filesystem framework
options     GEOM_PART_GPT        # GUID Partition Tables.
options     GEOM_LABEL        # Provides labelization
options     COMPAT_43TTY        # BSD 4.3 TTY compat [KEEP THIS!]
options     COMPAT_FREEBSD4        # Compatible with FreeBSD4
options     COMPAT_FREEBSD5        # Compatible with FreeBSD5
options     COMPAT_FREEBSD6        # Compatible with FreeBSD6
#options     SCSI_DELAY=5000        # Delay (in ms) before probing SCSI
#options     KTRACE            # ktrace(1) support
options     SYSVSHM            # SYSV-style shared memory
options     SYSVMSG            # SYSV-style message queues
options     SYSVSEM            # SYSV-style semaphores
#options     _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
#options     KBD_INSTALL_CDEV    # install a CDEV entry in /dev
options     ADAPTIVE_GIANT        # Giant mutex is adaptive.
#options     STOP_NMI        # Stop CPUS using NMI instead of IPI
#options     AUDIT            # Security event auditing

# To make an SMP kernel, the next two lines are needed
options     SMP            # Symmetric MultiProcessor Kernel
device        apic            # I/O APIC

# CPU frequency control
device        cpufreq

# Bus support.
device        eisa
device        pci

# Floppy drives
device        fdc

# ATA and ATAPI devices
device        ata
device        atadisk        # ATA disk drives
#device        ataraid        # ATA RAID drives
device        atapicd        # ATAPI CDROM drives
device        atapifd        # ATAPI floppy drives
device        atapicam
#device        atapist        # ATAPI tape drives
#options     ATA_STATIC_ID    # Static device numbering

# SCSI Controllers
#device        ahb        # EISA AHA1742 family
#device        ahc        # AHA2940 and onboard AIC7xxx devices
#options     AHC_REG_PRETTY_PRINT    # Print register bitfields in debug
                   # output. Adds ~128k to driver.
#device        ahd        # AHA39320/29320 and onboard AIC79xx devices
#options     AHD_REG_PRETTY_PRINT    # Print register bitfields in debug
                   # output. Adds ~215k to driver.
device        amd        # AMD 53C974 (Tekram DC-390(T))
#device        hptiop        # Highpoint RocketRaid 3xxx series
#device        isp        # Qlogic family
#device     ispfw        # Firmware for QLogic HBAs- normally a module
#device        mpt        # LSI-Logic MPT-Fusion
#device        ncr        # NCR/Symbios Logic
#device        sym        # NCR/Symbios Logic (newer chipsets + those of `ncr')
#device        trm        # Tekram DC395U/UW/F DC315U adapters

#device        adv        # Advansys SCSI adapters
#device        adw        # Advansys wide SCSI adapters
#device        aha        # Adaptec 154x SCSI adapters
#device        aic        # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#device        bt        # Buslogic/Mylex MultiMaster SCSI adapters

#device        ncv        # NCR 53C500
#device        nsp        # Workbit Ninja SCSI-3
#device        stg        # TMC 18C30/18C50

# SCSI peripherals
device        scbus        # SCSI bus (required for SCSI)
#device        ch        # SCSI media changers
device        da        # Direct Access (disks)
#device        sa        # Sequential Access (tape etc)
device        cd        # CD
device        pass        # Passthrough device (direct SCSI access)
#device        ses        # SCSI Environmental Services (and SAF-TE)

# RAID controllers interfaced to the SCSI subsystem
#device        amr        # AMI MegaRAID
#device        arcmsr        # Areca SATA II RAID
#device        asr        # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device        ciss        # Compaq Smart RAID 5*
#device        dpt        # DPT Smartcache III, IV - See NOTES for options
#device        hptmv        # Highpoint RocketRAID 182x
#device        hptrr        # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
#device        iir        # Intel Integrated RAID
#device        ips        # IBM (Adaptec) ServeRAID
#device        mly        # Mylex AcceleRAID/eXtremeRAID
#device        twa        # 3ware 9000 series PATA/SATA RAID

# RAID controllers
#device        aac        # Adaptec FSA RAID
#device        aacp        # SCSI passthrough for aac (requires CAM)
#device        ida        # Compaq Smart RAID
#device        mfi        # LSI MegaRAID SAS
#device        mlx        # Mylex DAC960 family
#device        pst        # Promise Supertrak SX6000
#device        twe        # 3ware ATA RAID

# atkbdc0 controls both the keyboard and the PS/2 mouse
device        atkbdc        # AT keyboard controller
device        atkbd        # AT keyboard
device        psm        # PS/2 mouse

device        kbdmux        # keyboard multiplexer

device        vga        # VGA video card driver

device        splash        # Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device        sc

#device        agp        # support several AGP chipsets

# Power management support (see NOTES for more options)
#device        apm
# Add suspend/resume support for the i8254.
device        pmtimer

# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
#device        cbb        # cardbus (yenta) bridge
#device        pccard        # PC Card (16-bit) bus
#device        cardbus        # CardBus (32-bit) bus

# Serial (COM) ports
device        sio        # 8250, 16[45]50 based serial ports
device        uart        # Generic UART driver

# Parallel port
device        ppc
device        ppbus        # Parallel port bus (required)
device        lpt        # Printer
device        plip        # TCP/IP over parallel
device        ppi        # Parallel port interface device
#device        vpo        # Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to sio, uart and/or ppc drivers):
#device        puc

# PCI Ethernet NICs.
device        de        # DEC/Intel DC21x4x (``Tulip'')
device        em        # Intel PRO/1000 adapter Gigabit Ethernet Card
device        ixgb        # Intel PRO/10GbE Ethernet Card
device        le        # AMD Am7900 LANCE and Am79C9xx PCnet
device        txp        # 3Com 3cR990 (``Typhoon'')
device        vx        # 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device        miibus        # MII bus support
#device        bce        # Broadcom BCM5706/BCM5708 Gigabit Ethernet
#device        bfe        # Broadcom BCM440x 10/100 Ethernet
#device        bge        # Broadcom BCM570xx Gigabit Ethernet
#device        dc        # DEC/Intel 21143 and various workalikes
#device        fxp        # Intel EtherExpress PRO/100B (82557, 82558)
#device        lge        # Level 1 LXT1001 gigabit Ethernet
device        msk        # Marvell/SysKonnect Yukon II Gigabit Ethernet
#device        nfe        # nVidia nForce MCP on-board Ethernet
#device        nge        # NatSemi DP83820 gigabit Ethernet
#device        nve        # nVidia nForce MCP on-board Ethernet Networking
#device        pcn        # AMD Am79C97x PCI 10/100 (precedence over 'le')
#device        re        # RealTek 8139C+/8169/8169S/8110S
#device        rl        # RealTek 8129/8139
#device        sf        # Adaptec AIC-6915 (``Starfire'')
#device        sis        # Silicon Integrated Systems SiS 900/SiS 7016
#device        sk        # SysKonnect SK-984x & SK-982x gigabit Ethernet
#device        ste        # Sundance ST201 (D-Link DFE-550TX)
#device        stge        # Sundance/Tamarack TC9021 gigabit Ethernet
#device        ti        # Alteon Networks Tigon I/II gigabit Ethernet
#device        tl        # Texas Instruments ThunderLAN
#device        tx        # SMC EtherPower II (83c170 ``EPIC'')
#device        vge        # VIA VT612x gigabit Ethernet
#device        vr        # VIA Rhine, Rhine II
#device        wb        # Winbond W89C840F
#device        xl        # 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs. pccard NICs included.
#device        cs        # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device        ed        # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device        ex        # Intel EtherExpress Pro/10 and Pro/10+
#device        ep        # Etherlink III based cards
#device        fe        # Fujitsu MB8696x based cards
#device        ie        # EtherExpress 8/16, 3C507, StarLAN 10 etc.
#device        sn        # SMC's 9000 series of Ethernet chips
#device        xe        # Xircom pccard Ethernet

# Wireless NIC cards
#device        wlan        # 802.11 support
#device        wlan_wep    # 802.11 WEP support
#device        wlan_ccmp    # 802.11 CCMP support
#device        wlan_tkip    # 802.11 TKIP support
#device        wlan_amrr    # AMRR transmit rate control algorithm
#device        wlan_scan_ap    # 802.11 AP mode scanning
#device        wlan_scan_sta    # 802.11 STA mode scanning
#device        an        # Aironet 4500/4800 802.11 wireless NICs.
#device        ath        # Atheros pci/cardbus NIC's
#device        ath_hal        # Atheros HAL (Hardware Access Layer)
#device        ath_rate_sample    # SampleRate tx rate control for ath
#device        awi        # BayStack 660 and others
#device        ral        # Ralink Technology RT2500 wireless NICs.
#device        wi        # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device        wl        # Older non 802.11 Wavelan wireless NIC.

# Pseudo devices.
device        loop        # Network loopback
device        random        # Entropy device
device        ether        # Ethernet support
device        sl        # Kernel SLIP
device        ppp        # Kernel PPP
device        tun        # Packet tunnel.
device        pty        # Pseudo-ttys (telnet etc)
device        md        # Memory "disks"
device        gif        # IPv6 and IPv4 tunneling
device        faith        # IPv6-to-IPv4 relaying (translation)
#device        firmware    # firmware assist module

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device        bpf        # Berkeley packet filter

# USB support
device        uhci        # UHCI PCI->USB interface
device        ohci        # OHCI PCI->USB interface
device        ehci        # EHCI PCI->USB interface (USB 2.0)
device        usb        # USB Bus (required)
#device        udbp        # USB Double Bulk Pipe devices
#device        ugen        # Generic
#device        uhid        # "Human Interface Devices"
#device        ukbd        # Keyboard
#device        ulpt        # Printer
device        umass        # Disks/Mass storage - Requires scbus and da
#device        ums        # Mouse
#device        ural        # Ralink Technology RT2500USB wireless NICs
#device        rum        # Ralink Technology RT2501USB wireless NICs
#device        urio        # Diamond Rio 500 MP3 player
#device        uscanner    # Scanners
# USB Ethernet, requires miibus
#device        aue        # ADMtek USB Ethernet
#device        axe        # ASIX Electronics USB Ethernet
#device        cdce        # Generic USB over Ethernet
#device        cue        # CATC USB Ethernet
#device        kue        # Kawasaki LSI USB Ethernet
#device        rue        # RealTek RTL8150 USB Ethernet

# FireWire support
device        firewire    # FireWire bus code
device        sbp        # SCSI over FireWire (Requires scbus and da)
device        fwe        # Ethernet over FireWire (non-standard!)
device        fwip        # IP over FireWire (RFC 2734,3146)
device        dcons        # Dumb console driver
device        dcons_crom    # Configuration ROM for dcons

Otpravi etot fail
~#:cp SMP /usr/src/sys/i386/conf/
~#:cd  /usr/src/ &&  make   buildkernel  KERNCONF=SMP
Ia toliko tschto sobral iadro na osnove etogo faila.Znacit fail horoshii.
Yadro vesit 4.505,075 Mb  Eto normalino, poskoliku ia vkliutschil v nem podderjku teh ustroistv kotoryie obnarujil v dmesg

Posle compileatsii iadra, delai tak:
~#:init 1 -perehodim v odnopolizovateliskii rejim
~#:cd /usr/src/ && make installkernel KERNCONF=SMP
Na sleduiishtschee priglashenie comandnoi stroki otveti:
~#:shutdown -r now
Teperi mashina zagrujaietsea s novym iadrom!
Tvoie jelezo mojno prevartatiti v prekrasnuiu rabotschuiu stantsiu na osnove FreeBSD na zavisti mnoghim. Sdaetsea mne tschto u tebea budet vozmojnosti polizovatisea Skype om i webcam. Etot fail eshtschio syrets i ego nado dorabotati. Nado vyiasniti nekotoryie puncty v # FireWire support.
Esli ty ukajeshi mne podrobnosti o razdelah tvoiego harddiska, ia smogu dati tebe mnogo poleznyh (nadeiusi) idei. Esli tvoia zvukovaia karta ne esti RealtekHD, togda ukaji pravilinui modeli karty, potomutschto priidiodtsea zameniti moduli. Takje tebe nado skatschati NVIDIA-FreeBSD-x86 !
Poka!

Post #: 14

RE: Сборка DVD диска - 2008-08-21 01:12:05.750000

Fad.Mypl

Сообщений: 49
Оценки: 0
Присоединился: 2008-08-13 13:17:23.186666

Итак. После перезагрузки на предложение командной строки mounroot> какие действия выполнять?

Post #: 15

RE: Сборка DVD диска - 2008-08-21 08:11:29.223333

mobydick

Сообщений: 354
Оценки: 0
Присоединился: 2008-08-08 01:16:49.146666

Nado perezagruziti machinu. Kogda uvidishi zagruzotschnoie meniu, vybirai
6.Loader prompt.
a na priglashenie boot:
otveti unload
dalishe boot /boot/kernel.old/kernel
teperi FreeBSD zapustitsea so starym iadrom.
Voidea v sistemu, zapusti sysinstall i soberi informatsiu o tom kak BSD raspoznaet
razdely tvoiego diska.
Naprimer u menea tak:ad0 - vesi disk
ad0s1 - slais BSD
ad0s1a - kornevoi razdel
ad0s1b -razdel podkatschki
……….
ad0s1g - razdel /home
mojno i poproshtsche: ~#: cat /etc/fstab > fstab.txt
Fail fstab pokaji mne .Eto mojet pomotschi.

Post #: 16

RE: Сборка DVD диска - 2008-08-21 10:08:14.316666

Fad.Mypl

Сообщений: 49
Оценки: 0
Присоединился: 2008-08-13 13:17:23.186666

Вот файл

# Device		Mountpoint	FStype	Options		Dump	Pass#
 /dev/ad6s1b		none		swap	sw		0	0
 /dev/ad6s1a		/		ufs	rw		1	1
 /dev/ad6s1g		/home		ufs	rw		2	2
 /dev/ad6s1e		/tmp		ufs	rw		2	2
 /dev/ad6s1f		/usr		ufs	rw		2	2
 /dev/ad6s1d		/var		ufs	rw		2	2
 /dev/acd0		/cdrom		cd9660	ro,noauto	0	0

Post #: 17

RE: Сборка DVD диска - 2008-08-21 11:00:21.180000

mobydick

Сообщений: 354
Оценки: 0
Присоединился: 2008-08-08 01:16:49.146666

Значит корневой раздел /dev/ad6s1a

mountroot > /dev/ad6s1a !

Post #: 18

RE: Сборка DVD диска - 2008-08-21 11:44:39.743333

Fad.Mypl

Сообщений: 49
Оценки: 0
Присоединился: 2008-08-13 13:17:23.186666

Блин, при выходе mountroot> и вводе /dev/ad6s1a а также ufs:ad6s1a и так далее, просто ноль эмоций,
происходит переход сторики, опять на тот же mountroot> и всё. В чём проблема?

Post #: 19

RE: Сборка DVD диска - 2008-08-21 15:47:31.680000

Fad.Mypl

Сообщений: 49
Оценки: 0
Присоединился: 2008-08-13 13:17:23.186666

Итак. При попытке набрать "?" он мне вывел разделы с другими именами, а именно ad0s1*
Примонтировал их. Теперь происходит ошибка запуска иксов.
И мышь неработает…

Такс….Иксы запустились, но с ошибками. Не работает мышь…

Иксы запускаются нормально…Мышь не работает до сих пор.

Post #: 20

RE: Сборка DVD диска - 2008-08-21 17:38:56.863333

mobydick

Сообщений: 354
Оценки: 0
Присоединился: 2008-08-08 01:16:49.146666

Ia hotshu znati
1)pod kakim iadrom proishodeat ety oshibki: GENERIC ili SMP?
2)zapuskalsea X-server u tebea pod GENERIC?

Esli tvoia sistema rabotaiet pod SMP, poproshu tebea proveriti kak ona raspoznaiet tvoiu zvukovuiu kartu. Dlea etogo: ~#: cat /boot/kernel/kernel > /dev/audio
Esli uslyshishi kakoi-to shum, znatschit eto uje uspeh.
Dlea preryvania etoi ahinei Ctrl+C neskoliko raz podread.
Tschtoby X-server rabotal ispravno, nado zapustiti ~#: xorgconfig.(iz textovoi konsoli!)i nastroiti X-server
Dlea opredelenia mousa vybirai 4. /dev/psm0

Post #: 21

RE: Сборка DVD диска - 2008-08-22 10:22:11.880000

Fad.Mypl

Сообщений: 49
Оценки: 0
Присоединился: 2008-08-13 13:17:23.186666

Ошибки происходят под новым ядром. Мышь ps/2 работает нормально, иксы под ним запускаются, тока выдают перед этим пару ошибок. Под старым ядром запускались идеально. А звуковая не распознаётся…Хотя определил ты её праильно- realtek
Мышь кстати MicrosoftIntelliMouse. При выборе её в сисинстале, она всё равно отказывает работать.

Post #: 22

RE: Сборка DVD диска - 2008-08-22 12:29:41.853333

mobydick

Сообщений: 354
Оценки: 0
Присоединился: 2008-08-08 01:16:49.146666

Doloji mne, pojaluista, kakuiu grafitscheskuiu sredu ili okonnyi menedjer ispolizuieshi.
A so zvukovoi kartoi postupai, tak:
~#: kldload snd_hda
Esli systema obnarujit tvoiu zvukovuiu, togda
~#: ee /boot/loader.conf
snd_hda_load="YES"
Dlea togo tschtob pered kajdoi sessii zagrujalsea driver.

Seitschas ia idu v magazin. Soobshtschi novosti kak mojno skoree!

Post #: 23

RE: Сборка DVD диска - 2008-08-22 13:13:57.226666

Fad.Mypl

Сообщений: 49
Оценки: 0
Присоединился: 2008-08-13 13:17:23.186666

Сижу на Gnome.
При наборе kldload snd_hda ничего не происходит

Хотя не, звук появился, тока Gnome всё равно выдаёт что его нет, и поэтому невозможно его конролировать =\\

Post #: 24

RE: Сборка DVD диска - 2008-08-22 14:13:41.016666

mobydick

Сообщений: 354
Оценки: 0
Присоединился: 2008-08-08 01:16:49.146666

U-r-a-a-a-a-a-a-a-a!
U tebea znatschit rabotaiet zvukovaia. Ne zabudi otredaktirovati /boot.loader.conf kak ia tebe ukazal vyshe.
FreeBSD imeet vstroiennuiu tulzu dlea upavlinia urovnem gromkosti :
~$:mixer pcm 75
Setting the mixer pcm from 70:70 to 75:75
A tschtoby i GNOME obrel golos, nado zaiti v podmeniu Preferences.
S grafitscheskim sredstvom nastroiki spravishsea uje i sam.
Hm.. a zrea ty etot GNOME. Ia naprimer iuzaiu Windowmaker. Esli mne nujna kakaia-to gnomovskaia programma, tak ia ustanavlivaiu imenno etu programmu so vsemi zavisimosteami, a potom iuzaiu iz Windowmaker, bystro i udobno. Naprimer ia otkompilil vtschera gedit
Tak, bysreniko primeni v praktiku moi urok, a posle etogo zaimeomsea i nastroikoi seti.

Post #: 25

RE: Сборка DVD диска - 2008-08-22 16:24:49.553333

Fad.Mypl

Сообщений: 49
Оценки: 0
Присоединился: 2008-08-13 13:17:23.186666

Хм…установил windowmaker….
Он наотрез отказывает запускаться, пишет при запуске
wmaker fatal error: could not open display ""

О, терь запустился нормально, осталось его настроить

Post #: 26

RE: Сборка DVD диска - 2008-08-22 18:23:53.926666

mobydick

Сообщений: 354
Оценки: 0
Присоединился: 2008-08-08 01:16:49.146666

Zapusti SYSINSTALL i nastraivai seti.

Post #: 27

RE: Сборка DVD диска - 2008-08-22 18:34:56.980000

Fad.Mypl

Сообщений: 49
Оценки: 0
Присоединился: 2008-08-13 13:17:23.186666

Сеть у меня полностью настроена…
Мне бы теперь шрифты в WindowMaker настроить с поддержкой русского
Да и мышь usb-шную нормально поставить
Да и ваще…Wmaker настроить полностью как нить…

Post #: 28

RE: Сборка DVD диска - 2008-08-22 21:22:50.666666

mobydick

Сообщений: 354
Оценки: 0
Присоединился: 2008-08-08 01:16:49.146666

Pozdravleaiu.
~#: cd /usr/ports/x11-fonts
~#: ls
Kutschea shriftov !
~#:cd fonts-alias
~#: make install clean

i.t.d.
Esli porty ne ustanovil, togda SYSINSTALL
Dlea usb-mouse peresobirati iadro s podderjkoi usb-mouse. Sm. razdel USB v faile configuratsii.
Dlea Intellimouse v xorgconfig vybirai 7.
P.S. Ia vspomnil, tebe nado obiazatelino ustanoviti webfons!
Dalishe otkroi menu nastroiki v Windowmaker i podberi shrift Georgia dlea
Window title. Tak budut pravilino otobrajatsea nazvania russkih web-stranits.
Ukrashai okonnyi manager. Idi na http://www.bsdnexus.com/wallpapers.htm
tam naidioshi, mnogo horoshih kartinok. Otpravi, eti kartinki v /usr/local/share/WindowMaker/Backgrounds.
ustanavlivai iz kollektsii portov Terminal /usr/ports/x11/Terminal
zapusti xclock

Post #: 29

RE: Сборка DVD диска - 2008-08-23 11:23:16.750000

Fad.Mypl

Сообщений: 49
Оценки: 0
Присоединился: 2008-08-13 13:17:23.186666

Шрифты настроил, бэкгроунд сменил, терминалы поставил. Каким образом добовляются, да и ваще меняются иконки и так далее на рабочем столе?
И как грамотнее его в автозапуск добавить?

Post #: 30

RE: Сборка DVD диска - 2008-08-23 13:46:07.193333

mobydick

Сообщений: 354
Оценки: 0
Присоединился: 2008-08-08 01:16:49.146666

Meneaiutsea ikonki v KDE.Eto prosto legkii i bystryi okonnyi manager. Ikonki poiavleaiutsea pri zapuske programm.
Ia litschno ne dodumalsea kak mojno meneati ikonki na rabotschem stole. Ikonki mne voobshtsche ne nujny. Ia privyk k zapusku programm iz kommandnoi stroki. Programmy zapuskaiutsea iz meniu kotoroie mojno vyzvati pravym shtscheltschkom mousa
ili F12. Tshchtoby dobaviti WindowMaker v avtozapusk:
~$: echo "exec wmaker" > ~/.xinitrc
Teperi startx vyzovet imenno etot okonnyi manager.
No ne jdi tschtob pri zapuske sistemy pered toboiu otkrylsea rabotschii stol bez logina!
FreeBSD ne SuSE … Esli tebe zahotelosi FreeBSD, togda soglashaisea s usloviami kotorymi
stavit FreeBSD.
Ia tebe rekommenduiu sozdati neskoliko utschetnyh zapisei, i dlea kajdoi iz nih ispolizovati
raznyie grafitscheskie okrujenia. Otkroi v liubom web-browsere russkuiu versiu handbooka
/usr/share/doc/… i tam naideoshi mnogo poleznyh veshtschei.
BTW, ty nitschego ne rasskazal pro NVIDIA.

Post #: 31

RE: Сборка DVD диска - 2008-08-23 18:35:42.900000

Fad.Mypl

Сообщений: 49
Оценки: 0
Присоединился: 2008-08-13 13:17:23.186666

C видео никаких проблем нет, драйвера установил нормально, всё работает…
С wm разобрался, установил всё под себя. Даже пару гномовских панелек добавил =)
Сеть работает, звук есть, осталось тока пару мелочей, и можно идти ставить апач и так далее

Post #: 32

RE: Сборка DVD диска - 2008-08-23 20:04:15.740000

napmbl3aH

Сообщений: 114
Оценки: 0
Присоединился: 2008-02-25 23:23:55.473333

а подскажите как с никсами такое сделать??? надоела пачка дискоффф))) и каждЫй по очереди вставлять

Post #: 33

RE: Сборка DVD диска - 2008-08-23 20:08:16.196666

mobydick

Сообщений: 354
Оценки: 0
Присоединился: 2008-08-08 01:16:49.146666

A nu-ka zahodi v /usr/ports/multimedia/mplayer i ustanovi mplayer.Dumaiu tschto ne pojaleieshi.
Drughie horoshie programmy:
/usr/ports/audio/madplay/
/usr/ports/mpg123
/usr/ports/rexima/
/usr/ports/aumix/

Takje ia tebe rekommenduiu /usr/ports/www/opera/
Dlea vyrajenia hudojestvennyh sposobnostei:
/usr/ports/graphics/gimp/

Post #: 34

RE: Сборка DVD диска - 2008-08-24 11:21:41.640000

Fad.Mypl

Сообщений: 49
Оценки: 0
Присоединился: 2008-08-13 13:17:23.186666

2napmbl3aH просто ставь всё с первого диска, без никаких пакетов, а всё что те нужно, устанавливай уже потом, через инет
2mobydick у меня opera давно стоит, не могу без неё) а из предложенных тобой пакетов, почти все установил сразу же как поставил систему)

Post #: 35

RE: Сборка DVD диска - 2008-08-24 15:20:04.470000

mobydick

Сообщений: 354
Оценки: 0
Присоединился: 2008-08-08 01:16:49.146666

Nu, znatschit ty opytnyi polizovateli FreeBSD. Zanimaisea iadrom. Iuzai freahu na polnuiu moshtschnosti. Rad byl pomotschi tebe. Esli tebe interesno poobshtschstsea so mnoi i dalishe, moi potschtovyi yashtschik stmardook@gmail.com

Post #: 36

RE: Сборка DVD диска - 2008-09-08 19:08:04.083333

stalker_thg

Сообщений: 21
Оценки: 0
Присоединился: 2008-09-01 04:09:18.383333

:D ну прям танцы с бубнами!
помню года 4 назад клеил по необходимости Mandrake 10.1 из 5 CD в 1DVD! ничего проще не было! просто собрать всю структуру дисков на 1 DVD и не забыть указать загрузочный образ! (имеется на тех же cd!)
все танцы выполнял под k3b!
недавно клеил FreeBSD 7 release из 4 CD в 1 DVD - пришлось немного протанцевать с бубном вокруг конфигов!

Post #: 37

RE: Сборка DVD диска - 2008-10-03 09:51:21.193333

NeXeLeN

Сообщений: 49
Оценки: 0
Присоединился: 2008-06-15 19:15:09.293333

Люди ПОМОГИТЕ! Пытаюсь собрать из 4 CD в DVD(FreeBSD7) как описано в мануалах, но по Windows XP, при загруске диска пишет что не может загрузиться Kernel. Что делать??? И как собрать 4CD в DVD под Windows???[:(]

Post #: 38

RE: Сборка DVD диска - 2008-10-04 19:10:37.530000

NeXeLeN

Сообщений: 49
Оценки: 0
Присоединился: 2008-06-15 19:15:09.293333

Хелп ми!Кто нибудь отзовитесь просто очень надо![:(]

Post #: 39

RE: Сборка DVD диска - 2008-10-04 19:26:14.580000

Wlada

Сообщений: 1233
Оценки: 0
Присоединился: 2007-09-24 12:01:26.970000

quote:

ORIGINAL: NeXeLeN
Люди ПОМОГИТЕ! Пытаюсь собрать из 4 CD в DVD(FreeBSD7) как описано в мануалах, но по Windows XP, при загруске диска пишет что не может загрузиться Kernel. Что делать??? И как собрать 4CD в DVD под Windows???[:(]

когда у тебя кернел пишет? до после или во время записи диска?

quote:

начинающий ХаКеР

Чтобы быть хакером надо быть программистом убирай это далее идут нецензурные словосочетания русского языка запрешеные на данном форуме

Post #: 40

Страниц: [1] 2

Все форумы >> [*nix/Linux] >> Сборка DVD диска

Связаться:
Вопросы по сайту / xakep@glc.ru

Предупреждение: использование полученных знаний в противозаконных целях преследуется по закону.